Description:
The EM Test NX5 is a versatile tester to address transient and power fail requirements for both international and commercial standards. Featuring an easy-to-use color touch screen, the NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking.
Compact NX5
Model: bsp-1-300-16 for Burst, Surge, Power Fail
Built-in single phase CDN 300 V, 16 A
Smallest compact generator with 7" touch screen
Surge Immunity per IEC 61000-4-5
EFT/Burst Immunity per IEC 61000-4-4
Powerfail Immunity per IEC 61000-4-11
Monitoring Outputs (BNC)
Pulse voltage (open circuit)
160 V - 5,000 V ± 10%
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse) Pulse conforms to IEC/EN 61000-4-5
Parameter
Value
Pulse current (short circuit)
Max 2,500 A ± 10%
Coupling
external / internal
Repetition time
10 ms - 9,999 ms
Pulse repetition
max. 1 Hz (1 s - 9999 s)
Phase synchronization
0° - 360°, resolution 1° (16 - 500 Hz)
Polarity
positive / negative / alternate
Coupling
external / internal
Phase synchronization
0° - 360°, resolution 1º
Dips, Interrupts & Variations Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Parameter
Value
Test duration
1 - 99,999 or endless, selectable
Test duration
0:01 min - 99:59 min or endless
Peak inrush current capability
greater than 500 Amps
Burst (EFT) 5/50 ns Pulse conforms to IEC/EN 61000-4-4
Parameter
Value
Pulse amplitude
200 V to 5.5 kV 100 V to 2.75 kV (50 Ω matching system)
Burst frequency
0.10 ms - 9999 ms
Polarity
positive / negative / alternate
Switching times
greater than 1 us less than 5 us into a 100 ohm resistive load (SVP 100)
Event time
20 us - 9,999 s
Test duration
20 us - 9,999 s
Repetition time
10 ms - 9,999 s
Phase synchronization
0° - 360°, resolution 1° (16 - 500 Hz)
Burst time
0.1 kHz - 1,000 kHz
The EM Test NX5 has clearly structured windows and operation features, comprehensive standards library along with the flexibility to easily generate user specific test sequences are the main features of iec.control software.
Extensive reporting capabilities help the user to create test reports that meet international requirements. The iec.control is supported by Windows 7, Windows 8 and Windows 10.
Remote control is achieved either via Ethernet or optical interface with USB connector at the PC side.
Standards Met:
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-8
IEC 61000-4-9
IEC 61000-4-11
IEC 61000-4-29
EN 61000-6-1
EN 61000-6-2
ECE-R10
EN 300329
EN 300340
EN 300342-1
EN 300386 V1.3.2
EN 301489-1
EN 50121
EN 55024
IEC 60255-22-5
FCC 97-270 (part 68)
IEC 61326
IEC 61850-3
ITU-T K.20
ITU-T K.21