Description:

Multifunctional Test Generator for Transients (EFT/Burst, Surge, Power Fail & Ringwave) up to 7 kV

The compact NX7 offers, a multifunctional test generator that meets and exceeds international and product-specific transient and power fail requirements. The compact NX7 series expands the voltage range of the compact NX5 series to 7.0 kV, and will replace the UCS 500N7 family in future. The generator has a modular design and can be manufactured with different combinations.

Compact NX7

Smallest Compact Generator with 7" Touch Screen
Burst 5.5 kV, Surge & Ringwave 7.0 kV, Power Fail
Selective test library adapted to the EUT setting
Built-in single phase CDN 400 V/32 A
Manual Front Panel operation with setup pictures
Separate Key for START/STOP operation with LED
Monitor outputs for peak voltage and current
Opto-Link, Ethernet and USB for remote control
Control of external three-phase couplers
Module PowerFail as per IEC/EN 61000-4-8/-11/-29(DC)

INTERFACES
Serial interface	2 x USB A for memory stick, 1 x USB B for service only, Opto - Link to USB for remote
LAN	Ethernet for remote
Analog Output	0 - 10 VDC to control an external transformer
Sys.link	26 pin high density connector to control an external coupling network
Fail inputs	EUT monitoring via input (one each) EUT Monitor 1 EUT Monitor 2
Ext. Trigger	BNC Ext. Trigger IN pos slope 5 V
Ext. Sync Input	Differential input, 50 V - 690 VAC, 2 x 4 mm MC Safety connectors
DIMENSIONS AND WEIGHT
16 A Models	19"/6 HU, 500 mm deep, 19"/9 HU, with telecom module, approx. 30 kg
32 A Models	19"/6 HU, 500 mm deep, 19"/9 HU, with telecom module, approx. 40 kg
ENVIRONMENT
Temperature	10 °C to 35 °C
Humidity	30 % to 75 %, non condensing
Atmospheric Pressure	86 kPa (860 mbar) to 106 kPa (1,060 mbar)
MAINS
Supply voltage	85 V - 264 V
Frequency	50/60 Hz
Power	approx. 75 W
Fuses	115 V: 2 x 4 A slow blow, 230 V: 2 x 2 A slow blow
SAFETY
Safety standard	IEC/EN 61010
Security circuit	Control input (24 VDC)
Warning lamp	Floating contact (max. 60 V/2 A)

The compact NX7 is a standalone generator which includes everything necessary to perform fully compliant tests. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility. The NX7 can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. Failure inputs allow control of an ongoing test sequence based on the state of the EUT. Monitoring outputs (BNC) offer easy signal verification and measurements. For enhanced safety requirements, features like interlock and a warning lamp are available. NX7 is the first generator that recognizes the connected EUT power configuration. Only coupling selections to active lines are enabled. Non existing lines will be disabled from the menu settings. Pre-programmed routines with common Test Standards allow maximum user convenience. Quick Start Test routines where parameters can be changed during susceptibility level evaluation are also available.

Specializing in EMC, RF,
and EV Product Lines

Compact NX7

Overview

Specifications

Benefits

Equipment Rental Quote

Our services are fully customizable.
Please take a moment to provide us with more details
and one of our representatives will be in touch with pricing options.

Areas of Service

Compact NX7

Overview

Specifications

Benefits

Equipment Rental Quote

Our services are fully customizable. Please take a moment to provide us with more details and one of our representatives will be in touch with pricing options.

Areas of Service

Our services are fully customizable.
Please take a moment to provide us with more details
and one of our representatives will be in touch with pricing options.